How to Avoid Fires when using Aluminum Wires
Article Source: HealthSnare.com
There are serious things to be considered for electrical energy consumers to reduce the risk of aluminum wiring fires. Usually these kinds of accidents are caused due to negligence or overuse of electrical power.
Safety precautionary measures must be observed when connecting aluminum wire installations to avoid overheating of materials that could possibly cause fire. A complete corrective checking on ground connections must be given due notice hence aluminum wirings must pass the quality set forth by standard regulations. You must see to it the wirings installed in your house and your building is not sub-standard. A regular routine in checking your aluminum wirings is greatly considered to avoid fire.
Overloading of plugs in one receptacle is a very dangerous thing to do especially if the receptacle is sub-standard hence overloading of home appliances like electric stoves and water heaters must be separated from other appliances. The heat creates a daisy-chain reaction to the circuit wherein the heat goes to the other terminals of one receptacle that could affect the performance of other appliances that are being plugged to the same receptacle.
Prolonged use of aluminum wires will tend to loosen the connections of the terminal screw to the end wire so you have to make it sure that it is well fixed and tight to its setting. Loose connection is another factor that could cause faulty wiring. When discoloration on the outer space of the aluminum wire may be a warning for you to take immediate action because discoloration often means that a spark occurred or an overheating of the device took place.
Always see to it that your aluminum wirings are new including the screw terminals connecting to the plate because it will lessen the operation of current circuit. Check if both ends are not tarnished considering that it will cause malfunction on the current circuit. In so doing, see to it that the main switch is down.
See to it that the binding-screw terminal is in accordance to required standard by using 6-32 size terminal screw with a diameter of 0.138. The screw that connects to the device into the box must be 8-32 at 0.164 thread.
Undersized aluminum wirings must be totally replaced to avoid overheating and melting of devices. Receptacles and switches that are of poor quality must also be replaced especially on appliances used inside the kitchen or on workplaces with various machines that have electrical connections.
See to it that the receptacles have new terminal screws and that it is well fixed and stable. See to it that the screws are not covered with rust as well as the plate because it is fire hazard and dangerous to the users as well. See to it that the screws and plates are in accordance to required standard to avoid unnecessary accidents. Just in case, replace any corroded device to new ones to avoid accidental fire. Lastly, a regular inspection must be conducted by a professional technician to avoid being ground.
About the Author
Article Submitted By:
Harvey Gonzalez
Html View
Total views: 1
Word Count: 508
Date: Sat, 25 Dec 2010 Time: 2:35 AM
Publish/Share this article
To use this article on your site click here to get the HTML code |Remember: The article body, title, author bio and links may not be changed or removed. By publishing this article, you agree to all the terms in our Terms of Service.
Rating: Not yet rated
